Nanuk 955 Wheeled Protective Case with Padded Dividers & Lid Foam - Black
Nanuk 955 Wheeled Pro Photo Kit Protective Case with Padded Dividers & Lid Organizer
Built to organize, protect, carry and survive tough conditions, the NANUK 955 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and it’s PowerClaw superior latching system. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it.
The NANUK 955 includes four (4) powerful latches.
At 22 inches long and nearly 10 inches deep, the NANUK 955 can store a whole lot of your essentials. The NANUK 955 hard case offers the maximum level of protection for all of your personal and professional equipment.
This protective case adds the convenience of wheels to make it much easier to travel with your photo gear, video gear, audio gear, industrial equipment, outdoor gear and much more! Three soft-grip handles make this wheeled case one of the most convenient on the market.
The 955's polyurethane wheels withstand rough terrain while the one-handed retractable handle offers unparalleled usability.
No matter where you go, you're guaranteed a smooth ride. For total equipment protection, look no further than the NANUK 955 case with retractable two-stage handle and super-smooth polyurethane wheels to get your gear safely and comfortably from point A to point B.
The NANUK 955 protective case comes with three (3) soft grip and ergonomic handles to make it easy to transport.
It also features stainless steel hardware and integrated springs to keep the handles out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight.
This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
Polyurethane Wheels
Smooth mobility is a major advantage, especially when transporting cumbersome equipment. This NANUK case features polycarbonate wheels molded with polyurethane. Similar to what you’d find on rollerblades, these wheels, along with their sealed stainless steel bearings, ensure a quiet, effortless trip over a multitude of terrains and through lots of weather conditions.
2-Stage Retractable Handle
Hassle-free transport comes courtesy of NANUK's two-stage retractable handle. Posture-friendly, the handle can be adjusted to two different heights and offers easy, one-handed open and close with its quick-release button.
PowerClaw Superior Latching System
Ensuring that your smaller gear stays well protected from the elements, this NANUK case's patented PowerClaw latching system uses compressive force and triple action to clamp your case tight. Integrated slide locks offer added security, preventing your case from opening during transport or if it’s dropped. The super tough nylon construction and stainless-steel hardware ensure that your important items stay safe in your NANUK waterproof case no matter where your journey takes you.
Design & Colors
Rounded corners and chamfered edges merge with strong character lines to deliver a design that is as sleek and modern as it is tough and reliable. Be it for aesthetic preference or more practical purposes, color choice is an important feature for many NANUK users - choose from up to nine colors depending on the case.
Indestructible & Lightweight NK-7 Resin
Impact-resistant, lightweight, and armed with an NK-7 resin body, this NANUK case is designed with rounded corners, thick, strong walls, and oversized details. No matter what nature throws its way, NANUK is built to survive. This NANUK is shock-absorbent to prevent damage to the case and, more importantly, to the valuable contents.
Automatic Pressure Release Valve
Changes in altitude, temperature, humidity and geographic location create a “vacuum lock” which can effectively seal a case shut. NANUK's integrated auto-pressure valve equalizes this atmospheric pressure difference. Using state-of-the-art technology, the micro vent allows air to pass through while preventing water from entering.
Reinforced Metal Padlock eyelets
NANUK comes loaded with innovative features. All models have integrate reinforced metal padlock eyelets that let you lock down your gear so you can carry and protect your valuables with confidence.
IP67 Waterproof & Dustproof
NANUK protective cases were primarily designed for front line protection, search and rescue missions, first responders, military, industrial, marine and diving uses. The professionals that rely on NANUK cases require a reliable, waterproof solution which resists deformation and fatigue. NANUK ensures a long-lasting, watertight seal - nothing gets in – nothing!
Features:
- Powerclaw Superior Latching System
- Waterproof IP67 Rated
- Impact Resistant NK-7 Resin
- Reinforced Metal Padlock Holes
- Shoulder Sangle Attachment
- Stackable
- 2-Level Retractable Handle
- Polyurethane Wheels
- Spring Loaded Top Handle
- Automatic Pressure Release Valve
- Integrated Lid Stay
- Removable Lid
- Top and Bottom Panel Mount
- 100% Stainless Steel Hardware
- Made in Canada
Compatible With:
Optional Accessories (Sold Separately):
- 955 Cubbed Foam
- 955 Lid Organizer
- 955 Padded Dividers
- 955 Aluminum Panel Kit
- 955 Lexan Panel Kit
- TSA Lock Bundle
- TSA Approved Case Lock
- Desiccant Container
- AirTag Holder
Size:
62.5 L
Dimensions:
Dimensions:
Interior (L×W×D): 22 x 17 x 10.2"
Exterior (L×W×D): 25.6 x 20 x 11.8"
Measurements:
Lid Depth: 2.1"
Base Depth: 8.1"
Int Volume: 62.5 L
Padlock Hole Diameter: 0.34"
Weights:
Weight With Foam: Not Specified by Manufacturer
Weight Empty: 18.4 lbs
Buoyancy: 140 lbs
Materials:
- Case Shell: NK-7 High Impact Polypropylene
- Latches: Nylon 66
- Handle: NK-7 High Impact Polypropylene | TPE
- Purge Valve: Nylon 66 | Gore Membrane | Silicone Washers
- Pins/Hardware : 304 stainless steel
- Gasket: EPDM
-
Backing Plate: NK-7 High Impact Polypropylene
-
Pull Handle: Polycarbonate + ABS | Nylon | TPE
- Wheels: Polyurethane | Polycarbonate
Configurations:
Design:
- 955 No Foam (Empty)
- 955 Cubed Foam & Eggshell Lid
- 955 Pro Photo Kit (Padded Dividers & Lid Organizer)
- 955 Padded Dividers & Eggshell Lid
- 955 Aluminum Panel Kit
- 955 Lexan Panel Kit
Colors:
-
Black
Airline Carry On:
No
Certifications:
- MIL-STD-810F Immersion
- ASTM D-4169 DC-18 Rainfall
- ASTM D-4169 DC-18 Vibration
- ASTM D-4169 DC-18 Drop Test
- ATA Specification 300 - Category 1 Impact
- IP6X Ingress Protection - Dustproof
- IPX7 Ingress Protection - Waterproof
Product SKU:
955S-060BK-0A0
In The Box:
Nanuk 955 Wheeled Protective Case - Black
955 Nanuk Lid Organizer
955 Padded Divider
Limited Lifetime Manufacturer Warranty
Nanuk 955 Wheeled Pro Photo Kit Protective Case with Padded Dividers & Lid Organizer
Built to organize, protect, carry and survive tough conditions, the NANUK 955 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and it’s PowerClaw superior latching system. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it.
The NANUK 955 includes four (4) powerful latches.
At 22 inches long and nearly 10 inches deep, the NANUK 955 can store a whole lot of your essentials. The NANUK 955 hard case offers the maximum level of protection for all of your personal and professional equipment.
This protective case adds the convenience of wheels to make it much easier to travel with your photo gear, video gear, audio gear, industrial equipment, outdoor gear and much more! Three soft-grip handles make this wheeled case one of the most convenient on the market.
The 955's polyurethane wheels withstand rough terrain while the one-handed retractable handle offers unparalleled usability.
No matter where you go, you're guaranteed a smooth ride. For total equipment protection, look no further than the NANUK 955 case with retractable two-stage handle and super-smooth polyurethane wheels to get your gear safely and comfortably from point A to point B.
The NANUK 955 protective case comes with three (3) soft grip and ergonomic handles to make it easy to transport.
It also features stainless steel hardware and integrated springs to keep the handles out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight.
This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
Polyurethane Wheels
Smooth mobility is a major advantage, especially when transporting cumbersome equipment. This NANUK case features polycarbonate wheels molded with polyurethane. Similar to what you’d find on rollerblades, these wheels, along with their sealed stainless steel bearings, ensure a quiet, effortless trip over a multitude of terrains and through lots of weather conditions.
2-Stage Retractable Handle
Hassle-free transport comes courtesy of NANUK's two-stage retractable handle. Posture-friendly, the handle can be adjusted to two different heights and offers easy, one-handed open and close with its quick-release button.
PowerClaw Superior Latching System
Ensuring that your smaller gear stays well protected from the elements, this NANUK case's patented PowerClaw latching system uses compressive force and triple action to clamp your case tight. Integrated slide locks offer added security, preventing your case from opening during transport or if it’s dropped. The super tough nylon construction and stainless-steel hardware ensure that your important items stay safe in your NANUK waterproof case no matter where your journey takes you.
Design & Colors
Rounded corners and chamfered edges merge with strong character lines to deliver a design that is as sleek and modern as it is tough and reliable. Be it for aesthetic preference or more practical purposes, color choice is an important feature for many NANUK users - choose from up to nine colors depending on the case.
Indestructible & Lightweight NK-7 Resin
Impact-resistant, lightweight, and armed with an NK-7 resin body, this NANUK case is designed with rounded corners, thick, strong walls, and oversized details. No matter what nature throws its way, NANUK is built to survive. This NANUK is shock-absorbent to prevent damage to the case and, more importantly, to the valuable contents.
Automatic Pressure Release Valve
Changes in altitude, temperature, humidity and geographic location create a “vacuum lock” which can effectively seal a case shut. NANUK's integrated auto-pressure valve equalizes this atmospheric pressure difference. Using state-of-the-art technology, the micro vent allows air to pass through while preventing water from entering.
Reinforced Metal Padlock eyelets
NANUK comes loaded with innovative features. All models have integrate reinforced metal padlock eyelets that let you lock down your gear so you can carry and protect your valuables with confidence.
IP67 Waterproof & Dustproof
NANUK protective cases were primarily designed for front line protection, search and rescue missions, first responders, military, industrial, marine and diving uses. The professionals that rely on NANUK cases require a reliable, waterproof solution which resists deformation and fatigue. NANUK ensures a long-lasting, watertight seal - nothing gets in – nothing!
Features:
- Powerclaw Superior Latching System
- Waterproof IP67 Rated
- Impact Resistant NK-7 Resin
- Reinforced Metal Padlock Holes
- Shoulder Sangle Attachment
- Stackable
- 2-Level Retractable Handle
- Polyurethane Wheels
- Spring Loaded Top Handle
- Automatic Pressure Release Valve
- Integrated Lid Stay
- Removable Lid
- Top and Bottom Panel Mount
- 100% Stainless Steel Hardware
- Made in Canada
Compatible With:
Optional Accessories (Sold Separately):
- 955 Cubbed Foam
- 955 Lid Organizer
- 955 Padded Dividers
- 955 Aluminum Panel Kit
- 955 Lexan Panel Kit
- TSA Lock Bundle
- TSA Approved Case Lock
- Desiccant Container
- AirTag Holder
Size:
62.5 L
Dimensions:
Dimensions:
Interior (L×W×D): 22 x 17 x 10.2"
Exterior (L×W×D): 25.6 x 20 x 11.8"
Measurements:
Lid Depth: 2.1"
Base Depth: 8.1"
Int Volume: 62.5 L
Padlock Hole Diameter: 0.34"
Weights:
Weight With Foam: Not Specified by Manufacturer
Weight Empty: 18.4 lbs
Buoyancy: 140 lbs
Materials:
- Case Shell: NK-7 High Impact Polypropylene
- Latches: Nylon 66
- Handle: NK-7 High Impact Polypropylene | TPE
- Purge Valve: Nylon 66 | Gore Membrane | Silicone Washers
- Pins/Hardware : 304 stainless steel
- Gasket: EPDM
-
Backing Plate: NK-7 High Impact Polypropylene
-
Pull Handle: Polycarbonate + ABS | Nylon | TPE
- Wheels: Polyurethane | Polycarbonate
Configurations:
Design:
- 955 No Foam (Empty)
- 955 Cubed Foam & Eggshell Lid
- 955 Pro Photo Kit (Padded Dividers & Lid Organizer)
- 955 Padded Dividers & Eggshell Lid
- 955 Aluminum Panel Kit
- 955 Lexan Panel Kit
Colors:
-
Black
Airline Carry On:
No
Certifications:
- MIL-STD-810F Immersion
- ASTM D-4169 DC-18 Rainfall
- ASTM D-4169 DC-18 Vibration
- ASTM D-4169 DC-18 Drop Test
- ATA Specification 300 - Category 1 Impact
- IP6X Ingress Protection - Dustproof
- IPX7 Ingress Protection - Waterproof
Product SKU:
955S-060BK-0A0
In The Box:
Nanuk 955 Wheeled Protective Case - Black
955 Nanuk Lid Organizer
955 Padded Divider
Limited Lifetime Manufacturer Warranty
Nanuk 955 Wheeled Pro Photo Kit Protective Case with Padded Dividers & Lid Organizer
Built to organize, protect, carry and survive tough conditions, the NANUK 955 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and it’s PowerClaw superior latching system. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it.
The NANUK 955 includes four (4) powerful latches.
At 22 inches long and nearly 10 inches deep, the NANUK 955 can store a whole lot of your essentials. The NANUK 955 hard case offers the maximum level of protection for all of your personal and professional equipment.
This protective case adds the convenience of wheels to make it much easier to travel with your photo gear, video gear, audio gear, industrial equipment, outdoor gear and much more! Three soft-grip handles make this wheeled case one of the most convenient on the market.
The 955's polyurethane wheels withstand rough terrain while the one-handed retractable handle offers unparalleled usability.
No matter where you go, you're guaranteed a smooth ride. For total equipment protection, look no further than the NANUK 955 case with retractable two-stage handle and super-smooth polyurethane wheels to get your gear safely and comfortably from point A to point B.
The NANUK 955 protective case comes with three (3) soft grip and ergonomic handles to make it easy to transport.
It also features stainless steel hardware and integrated springs to keep the handles out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight.
This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
Polyurethane Wheels
Smooth mobility is a major advantage, especially when transporting cumbersome equipment. This NANUK case features polycarbonate wheels molded with polyurethane. Similar to what you’d find on rollerblades, these wheels, along with their sealed stainless steel bearings, ensure a quiet, effortless trip over a multitude of terrains and through lots of weather conditions.
2-Stage Retractable Handle
Hassle-free transport comes courtesy of NANUK's two-stage retractable handle. Posture-friendly, the handle can be adjusted to two different heights and offers easy, one-handed open and close with its quick-release button.
PowerClaw Superior Latching System
Ensuring that your smaller gear stays well protected from the elements, this NANUK case's patented PowerClaw latching system uses compressive force and triple action to clamp your case tight. Integrated slide locks offer added security, preventing your case from opening during transport or if it’s dropped. The super tough nylon construction and stainless-steel hardware ensure that your important items stay safe in your NANUK waterproof case no matter where your journey takes you.
Design & Colors
Rounded corners and chamfered edges merge with strong character lines to deliver a design that is as sleek and modern as it is tough and reliable. Be it for aesthetic preference or more practical purposes, color choice is an important feature for many NANUK users - choose from up to nine colors depending on the case.
Indestructible & Lightweight NK-7 Resin
Impact-resistant, lightweight, and armed with an NK-7 resin body, this NANUK case is designed with rounded corners, thick, strong walls, and oversized details. No matter what nature throws its way, NANUK is built to survive. This NANUK is shock-absorbent to prevent damage to the case and, more importantly, to the valuable contents.
Automatic Pressure Release Valve
Changes in altitude, temperature, humidity and geographic location create a “vacuum lock” which can effectively seal a case shut. NANUK's integrated auto-pressure valve equalizes this atmospheric pressure difference. Using state-of-the-art technology, the micro vent allows air to pass through while preventing water from entering.
Reinforced Metal Padlock eyelets
NANUK comes loaded with innovative features. All models have integrate reinforced metal padlock eyelets that let you lock down your gear so you can carry and protect your valuables with confidence.
IP67 Waterproof & Dustproof
NANUK protective cases were primarily designed for front line protection, search and rescue missions, first responders, military, industrial, marine and diving uses. The professionals that rely on NANUK cases require a reliable, waterproof solution which resists deformation and fatigue. NANUK ensures a long-lasting, watertight seal - nothing gets in – nothing!
Features:
- Powerclaw Superior Latching System
- Waterproof IP67 Rated
- Impact Resistant NK-7 Resin
- Reinforced Metal Padlock Holes
- Shoulder Sangle Attachment
- Stackable
- 2-Level Retractable Handle
- Polyurethane Wheels
- Spring Loaded Top Handle
- Automatic Pressure Release Valve
- Integrated Lid Stay
- Removable Lid
- Top and Bottom Panel Mount
- 100% Stainless Steel Hardware
- Made in Canada
Compatible With:
Optional Accessories (Sold Separately):
- 955 Cubbed Foam
- 955 Lid Organizer
- 955 Padded Dividers
- 955 Aluminum Panel Kit
- 955 Lexan Panel Kit
- TSA Lock Bundle
- TSA Approved Case Lock
- Desiccant Container
- AirTag Holder
Size:
62.5 L
Dimensions:
Dimensions:
Interior (L×W×D): 22 x 17 x 10.2"
Exterior (L×W×D): 25.6 x 20 x 11.8"
Measurements:
Lid Depth: 2.1"
Base Depth: 8.1"
Int Volume: 62.5 L
Padlock Hole Diameter: 0.34"
Weights:
Weight With Foam: Not Specified by Manufacturer
Weight Empty: 18.4 lbs
Buoyancy: 140 lbs
Materials:
- Case Shell: NK-7 High Impact Polypropylene
- Latches: Nylon 66
- Handle: NK-7 High Impact Polypropylene | TPE
- Purge Valve: Nylon 66 | Gore Membrane | Silicone Washers
- Pins/Hardware : 304 stainless steel
- Gasket: EPDM
-
Backing Plate: NK-7 High Impact Polypropylene
-
Pull Handle: Polycarbonate + ABS | Nylon | TPE
- Wheels: Polyurethane | Polycarbonate
Configurations:
Design:
- 955 No Foam (Empty)
- 955 Cubed Foam & Eggshell Lid
- 955 Pro Photo Kit (Padded Dividers & Lid Organizer)
- 955 Padded Dividers & Eggshell Lid
- 955 Aluminum Panel Kit
- 955 Lexan Panel Kit
Colors:
-
Black
Airline Carry On:
No
Certifications:
- MIL-STD-810F Immersion
- ASTM D-4169 DC-18 Rainfall
- ASTM D-4169 DC-18 Vibration
- ASTM D-4169 DC-18 Drop Test
- ATA Specification 300 - Category 1 Impact
- IP6X Ingress Protection - Dustproof
- IPX7 Ingress Protection - Waterproof
Product SKU:
955S-060BK-0A0
In The Box:
Nanuk 955 Wheeled Protective Case - Black
955 Nanuk Lid Organizer
955 Padded Divider
Limited Lifetime Manufacturer Warranty
Original: $469.95
-65%$469.95
$164.48
Description
Nanuk 955 Wheeled Pro Photo Kit Protective Case with Padded Dividers & Lid Organizer
Built to organize, protect, carry and survive tough conditions, the NANUK 955 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and it’s PowerClaw superior latching system. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it.
The NANUK 955 includes four (4) powerful latches.
At 22 inches long and nearly 10 inches deep, the NANUK 955 can store a whole lot of your essentials. The NANUK 955 hard case offers the maximum level of protection for all of your personal and professional equipment.
This protective case adds the convenience of wheels to make it much easier to travel with your photo gear, video gear, audio gear, industrial equipment, outdoor gear and much more! Three soft-grip handles make this wheeled case one of the most convenient on the market.
The 955's polyurethane wheels withstand rough terrain while the one-handed retractable handle offers unparalleled usability.
No matter where you go, you're guaranteed a smooth ride. For total equipment protection, look no further than the NANUK 955 case with retractable two-stage handle and super-smooth polyurethane wheels to get your gear safely and comfortably from point A to point B.
The NANUK 955 protective case comes with three (3) soft grip and ergonomic handles to make it easy to transport.
It also features stainless steel hardware and integrated springs to keep the handles out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight.
This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
Polyurethane Wheels
Smooth mobility is a major advantage, especially when transporting cumbersome equipment. This NANUK case features polycarbonate wheels molded with polyurethane. Similar to what you’d find on rollerblades, these wheels, along with their sealed stainless steel bearings, ensure a quiet, effortless trip over a multitude of terrains and through lots of weather conditions.
2-Stage Retractable Handle
Hassle-free transport comes courtesy of NANUK's two-stage retractable handle. Posture-friendly, the handle can be adjusted to two different heights and offers easy, one-handed open and close with its quick-release button.
PowerClaw Superior Latching System
Ensuring that your smaller gear stays well protected from the elements, this NANUK case's patented PowerClaw latching system uses compressive force and triple action to clamp your case tight. Integrated slide locks offer added security, preventing your case from opening during transport or if it’s dropped. The super tough nylon construction and stainless-steel hardware ensure that your important items stay safe in your NANUK waterproof case no matter where your journey takes you.
Design & Colors
Rounded corners and chamfered edges merge with strong character lines to deliver a design that is as sleek and modern as it is tough and reliable. Be it for aesthetic preference or more practical purposes, color choice is an important feature for many NANUK users - choose from up to nine colors depending on the case.
Indestructible & Lightweight NK-7 Resin
Impact-resistant, lightweight, and armed with an NK-7 resin body, this NANUK case is designed with rounded corners, thick, strong walls, and oversized details. No matter what nature throws its way, NANUK is built to survive. This NANUK is shock-absorbent to prevent damage to the case and, more importantly, to the valuable contents.
Automatic Pressure Release Valve
Changes in altitude, temperature, humidity and geographic location create a “vacuum lock” which can effectively seal a case shut. NANUK's integrated auto-pressure valve equalizes this atmospheric pressure difference. Using state-of-the-art technology, the micro vent allows air to pass through while preventing water from entering.
Reinforced Metal Padlock eyelets
NANUK comes loaded with innovative features. All models have integrate reinforced metal padlock eyelets that let you lock down your gear so you can carry and protect your valuables with confidence.
IP67 Waterproof & Dustproof
NANUK protective cases were primarily designed for front line protection, search and rescue missions, first responders, military, industrial, marine and diving uses. The professionals that rely on NANUK cases require a reliable, waterproof solution which resists deformation and fatigue. NANUK ensures a long-lasting, watertight seal - nothing gets in – nothing!
Features:
- Powerclaw Superior Latching System
- Waterproof IP67 Rated
- Impact Resistant NK-7 Resin
- Reinforced Metal Padlock Holes
- Shoulder Sangle Attachment
- Stackable
- 2-Level Retractable Handle
- Polyurethane Wheels
- Spring Loaded Top Handle
- Automatic Pressure Release Valve
- Integrated Lid Stay
- Removable Lid
- Top and Bottom Panel Mount
- 100% Stainless Steel Hardware
- Made in Canada
Compatible With:
Optional Accessories (Sold Separately):
- 955 Cubbed Foam
- 955 Lid Organizer
- 955 Padded Dividers
- 955 Aluminum Panel Kit
- 955 Lexan Panel Kit
- TSA Lock Bundle
- TSA Approved Case Lock
- Desiccant Container
- AirTag Holder
Size:
62.5 L
Dimensions:
Dimensions:
Interior (L×W×D): 22 x 17 x 10.2"
Exterior (L×W×D): 25.6 x 20 x 11.8"
Measurements:
Lid Depth: 2.1"
Base Depth: 8.1"
Int Volume: 62.5 L
Padlock Hole Diameter: 0.34"
Weights:
Weight With Foam: Not Specified by Manufacturer
Weight Empty: 18.4 lbs
Buoyancy: 140 lbs
Materials:
- Case Shell: NK-7 High Impact Polypropylene
- Latches: Nylon 66
- Handle: NK-7 High Impact Polypropylene | TPE
- Purge Valve: Nylon 66 | Gore Membrane | Silicone Washers
- Pins/Hardware : 304 stainless steel
- Gasket: EPDM
-
Backing Plate: NK-7 High Impact Polypropylene
-
Pull Handle: Polycarbonate + ABS | Nylon | TPE
- Wheels: Polyurethane | Polycarbonate
Configurations:
Design:
- 955 No Foam (Empty)
- 955 Cubed Foam & Eggshell Lid
- 955 Pro Photo Kit (Padded Dividers & Lid Organizer)
- 955 Padded Dividers & Eggshell Lid
- 955 Aluminum Panel Kit
- 955 Lexan Panel Kit
Colors:
-
Black
Airline Carry On:
No
Certifications:
- MIL-STD-810F Immersion
- ASTM D-4169 DC-18 Rainfall
- ASTM D-4169 DC-18 Vibration
- ASTM D-4169 DC-18 Drop Test
- ATA Specification 300 - Category 1 Impact
- IP6X Ingress Protection - Dustproof
- IPX7 Ingress Protection - Waterproof
Product SKU:
955S-060BK-0A0
In The Box:
Nanuk 955 Wheeled Protective Case - Black
955 Nanuk Lid Organizer
955 Padded Divider
Limited Lifetime Manufacturer Warranty
Nanuk 955 Wheeled Pro Photo Kit Protective Case with Padded Dividers & Lid Organizer
Built to organize, protect, carry and survive tough conditions, the NANUK 955 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and it’s PowerClaw superior latching system. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it.
The NANUK 955 includes four (4) powerful latches.
At 22 inches long and nearly 10 inches deep, the NANUK 955 can store a whole lot of your essentials. The NANUK 955 hard case offers the maximum level of protection for all of your personal and professional equipment.
This protective case adds the convenience of wheels to make it much easier to travel with your photo gear, video gear, audio gear, industrial equipment, outdoor gear and much more! Three soft-grip handles make this wheeled case one of the most convenient on the market.
The 955's polyurethane wheels withstand rough terrain while the one-handed retractable handle offers unparalleled usability.
No matter where you go, you're guaranteed a smooth ride. For total equipment protection, look no further than the NANUK 955 case with retractable two-stage handle and super-smooth polyurethane wheels to get your gear safely and comfortably from point A to point B.
The NANUK 955 protective case comes with three (3) soft grip and ergonomic handles to make it easy to transport.
It also features stainless steel hardware and integrated springs to keep the handles out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight.
This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
Polyurethane Wheels
Smooth mobility is a major advantage, especially when transporting cumbersome equipment. This NANUK case features polycarbonate wheels molded with polyurethane. Similar to what you’d find on rollerblades, these wheels, along with their sealed stainless steel bearings, ensure a quiet, effortless trip over a multitude of terrains and through lots of weather conditions.
2-Stage Retractable Handle
Hassle-free transport comes courtesy of NANUK's two-stage retractable handle. Posture-friendly, the handle can be adjusted to two different heights and offers easy, one-handed open and close with its quick-release button.
PowerClaw Superior Latching System
Ensuring that your smaller gear stays well protected from the elements, this NANUK case's patented PowerClaw latching system uses compressive force and triple action to clamp your case tight. Integrated slide locks offer added security, preventing your case from opening during transport or if it’s dropped. The super tough nylon construction and stainless-steel hardware ensure that your important items stay safe in your NANUK waterproof case no matter where your journey takes you.
Design & Colors
Rounded corners and chamfered edges merge with strong character lines to deliver a design that is as sleek and modern as it is tough and reliable. Be it for aesthetic preference or more practical purposes, color choice is an important feature for many NANUK users - choose from up to nine colors depending on the case.
Indestructible & Lightweight NK-7 Resin
Impact-resistant, lightweight, and armed with an NK-7 resin body, this NANUK case is designed with rounded corners, thick, strong walls, and oversized details. No matter what nature throws its way, NANUK is built to survive. This NANUK is shock-absorbent to prevent damage to the case and, more importantly, to the valuable contents.
Automatic Pressure Release Valve
Changes in altitude, temperature, humidity and geographic location create a “vacuum lock” which can effectively seal a case shut. NANUK's integrated auto-pressure valve equalizes this atmospheric pressure difference. Using state-of-the-art technology, the micro vent allows air to pass through while preventing water from entering.
Reinforced Metal Padlock eyelets
NANUK comes loaded with innovative features. All models have integrate reinforced metal padlock eyelets that let you lock down your gear so you can carry and protect your valuables with confidence.
IP67 Waterproof & Dustproof
NANUK protective cases were primarily designed for front line protection, search and rescue missions, first responders, military, industrial, marine and diving uses. The professionals that rely on NANUK cases require a reliable, waterproof solution which resists deformation and fatigue. NANUK ensures a long-lasting, watertight seal - nothing gets in – nothing!
Features:
- Powerclaw Superior Latching System
- Waterproof IP67 Rated
- Impact Resistant NK-7 Resin
- Reinforced Metal Padlock Holes
- Shoulder Sangle Attachment
- Stackable
- 2-Level Retractable Handle
- Polyurethane Wheels
- Spring Loaded Top Handle
- Automatic Pressure Release Valve
- Integrated Lid Stay
- Removable Lid
- Top and Bottom Panel Mount
- 100% Stainless Steel Hardware
- Made in Canada
Compatible With:
Optional Accessories (Sold Separately):
- 955 Cubbed Foam
- 955 Lid Organizer
- 955 Padded Dividers
- 955 Aluminum Panel Kit
- 955 Lexan Panel Kit
- TSA Lock Bundle
- TSA Approved Case Lock
- Desiccant Container
- AirTag Holder
Size:
62.5 L
Dimensions:
Dimensions:
Interior (L×W×D): 22 x 17 x 10.2"
Exterior (L×W×D): 25.6 x 20 x 11.8"
Measurements:
Lid Depth: 2.1"
Base Depth: 8.1"
Int Volume: 62.5 L
Padlock Hole Diameter: 0.34"
Weights:
Weight With Foam: Not Specified by Manufacturer
Weight Empty: 18.4 lbs
Buoyancy: 140 lbs
Materials:
- Case Shell: NK-7 High Impact Polypropylene
- Latches: Nylon 66
- Handle: NK-7 High Impact Polypropylene | TPE
- Purge Valve: Nylon 66 | Gore Membrane | Silicone Washers
- Pins/Hardware : 304 stainless steel
- Gasket: EPDM
-
Backing Plate: NK-7 High Impact Polypropylene
-
Pull Handle: Polycarbonate + ABS | Nylon | TPE
- Wheels: Polyurethane | Polycarbonate
Configurations:
Design:
- 955 No Foam (Empty)
- 955 Cubed Foam & Eggshell Lid
- 955 Pro Photo Kit (Padded Dividers & Lid Organizer)
- 955 Padded Dividers & Eggshell Lid
- 955 Aluminum Panel Kit
- 955 Lexan Panel Kit
Colors:
-
Black
Airline Carry On:
No
Certifications:
- MIL-STD-810F Immersion
- ASTM D-4169 DC-18 Rainfall
- ASTM D-4169 DC-18 Vibration
- ASTM D-4169 DC-18 Drop Test
- ATA Specification 300 - Category 1 Impact
- IP6X Ingress Protection - Dustproof
- IPX7 Ingress Protection - Waterproof
Product SKU:
955S-060BK-0A0
In The Box:
Nanuk 955 Wheeled Protective Case - Black
955 Nanuk Lid Organizer
955 Padded Divider
Limited Lifetime Manufacturer Warranty
Nanuk 955 Wheeled Pro Photo Kit Protective Case with Padded Dividers & Lid Organizer
Built to organize, protect, carry and survive tough conditions, the NANUK 955 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and it’s PowerClaw superior latching system. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it.
The NANUK 955 includes four (4) powerful latches.
At 22 inches long and nearly 10 inches deep, the NANUK 955 can store a whole lot of your essentials. The NANUK 955 hard case offers the maximum level of protection for all of your personal and professional equipment.
This protective case adds the convenience of wheels to make it much easier to travel with your photo gear, video gear, audio gear, industrial equipment, outdoor gear and much more! Three soft-grip handles make this wheeled case one of the most convenient on the market.
The 955's polyurethane wheels withstand rough terrain while the one-handed retractable handle offers unparalleled usability.
No matter where you go, you're guaranteed a smooth ride. For total equipment protection, look no further than the NANUK 955 case with retractable two-stage handle and super-smooth polyurethane wheels to get your gear safely and comfortably from point A to point B.
The NANUK 955 protective case comes with three (3) soft grip and ergonomic handles to make it easy to transport.
It also features stainless steel hardware and integrated springs to keep the handles out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight.
This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
Polyurethane Wheels
Smooth mobility is a major advantage, especially when transporting cumbersome equipment. This NANUK case features polycarbonate wheels molded with polyurethane. Similar to what you’d find on rollerblades, these wheels, along with their sealed stainless steel bearings, ensure a quiet, effortless trip over a multitude of terrains and through lots of weather conditions.
2-Stage Retractable Handle
Hassle-free transport comes courtesy of NANUK's two-stage retractable handle. Posture-friendly, the handle can be adjusted to two different heights and offers easy, one-handed open and close with its quick-release button.
PowerClaw Superior Latching System
Ensuring that your smaller gear stays well protected from the elements, this NANUK case's patented PowerClaw latching system uses compressive force and triple action to clamp your case tight. Integrated slide locks offer added security, preventing your case from opening during transport or if it’s dropped. The super tough nylon construction and stainless-steel hardware ensure that your important items stay safe in your NANUK waterproof case no matter where your journey takes you.
Design & Colors
Rounded corners and chamfered edges merge with strong character lines to deliver a design that is as sleek and modern as it is tough and reliable. Be it for aesthetic preference or more practical purposes, color choice is an important feature for many NANUK users - choose from up to nine colors depending on the case.
Indestructible & Lightweight NK-7 Resin
Impact-resistant, lightweight, and armed with an NK-7 resin body, this NANUK case is designed with rounded corners, thick, strong walls, and oversized details. No matter what nature throws its way, NANUK is built to survive. This NANUK is shock-absorbent to prevent damage to the case and, more importantly, to the valuable contents.
Automatic Pressure Release Valve
Changes in altitude, temperature, humidity and geographic location create a “vacuum lock” which can effectively seal a case shut. NANUK's integrated auto-pressure valve equalizes this atmospheric pressure difference. Using state-of-the-art technology, the micro vent allows air to pass through while preventing water from entering.
Reinforced Metal Padlock eyelets
NANUK comes loaded with innovative features. All models have integrate reinforced metal padlock eyelets that let you lock down your gear so you can carry and protect your valuables with confidence.
IP67 Waterproof & Dustproof
NANUK protective cases were primarily designed for front line protection, search and rescue missions, first responders, military, industrial, marine and diving uses. The professionals that rely on NANUK cases require a reliable, waterproof solution which resists deformation and fatigue. NANUK ensures a long-lasting, watertight seal - nothing gets in – nothing!
Features:
- Powerclaw Superior Latching System
- Waterproof IP67 Rated
- Impact Resistant NK-7 Resin
- Reinforced Metal Padlock Holes
- Shoulder Sangle Attachment
- Stackable
- 2-Level Retractable Handle
- Polyurethane Wheels
- Spring Loaded Top Handle
- Automatic Pressure Release Valve
- Integrated Lid Stay
- Removable Lid
- Top and Bottom Panel Mount
- 100% Stainless Steel Hardware
- Made in Canada
Compatible With:
Optional Accessories (Sold Separately):
- 955 Cubbed Foam
- 955 Lid Organizer
- 955 Padded Dividers
- 955 Aluminum Panel Kit
- 955 Lexan Panel Kit
- TSA Lock Bundle
- TSA Approved Case Lock
- Desiccant Container
- AirTag Holder
Size:
62.5 L
Dimensions:
Dimensions:
Interior (L×W×D): 22 x 17 x 10.2"
Exterior (L×W×D): 25.6 x 20 x 11.8"
Measurements:
Lid Depth: 2.1"
Base Depth: 8.1"
Int Volume: 62.5 L
Padlock Hole Diameter: 0.34"
Weights:
Weight With Foam: Not Specified by Manufacturer
Weight Empty: 18.4 lbs
Buoyancy: 140 lbs
Materials:
- Case Shell: NK-7 High Impact Polypropylene
- Latches: Nylon 66
- Handle: NK-7 High Impact Polypropylene | TPE
- Purge Valve: Nylon 66 | Gore Membrane | Silicone Washers
- Pins/Hardware : 304 stainless steel
- Gasket: EPDM
-
Backing Plate: NK-7 High Impact Polypropylene
-
Pull Handle: Polycarbonate + ABS | Nylon | TPE
- Wheels: Polyurethane | Polycarbonate
Configurations:
Design:
- 955 No Foam (Empty)
- 955 Cubed Foam & Eggshell Lid
- 955 Pro Photo Kit (Padded Dividers & Lid Organizer)
- 955 Padded Dividers & Eggshell Lid
- 955 Aluminum Panel Kit
- 955 Lexan Panel Kit
Colors:
-
Black
Airline Carry On:
No
Certifications:
- MIL-STD-810F Immersion
- ASTM D-4169 DC-18 Rainfall
- ASTM D-4169 DC-18 Vibration
- ASTM D-4169 DC-18 Drop Test
- ATA Specification 300 - Category 1 Impact
- IP6X Ingress Protection - Dustproof
- IPX7 Ingress Protection - Waterproof
Product SKU:
955S-060BK-0A0
In The Box:
Nanuk 955 Wheeled Protective Case - Black
955 Nanuk Lid Organizer
955 Padded Divider
Limited Lifetime Manufacturer Warranty
